Pool Filter Cleaning

Perfection is our standard

Fully Breakdown & Inspect Pool Filter
Thoroughly Clean Swimming Pool Filter Grids & Pool Cartridges
Clean Pool Tank -Inspect Pool Filter for Holes & Tears
Lube O-Rings & Reassemble Swimming Pool Filter

Pool Filter Cleaning in Allen and Collin County

Your filter removes the dirt and fine particles that cause cloudy water. When it clogs, your pump has to work harder, which can lead to early pump motor failure, cracked filter housings and poor circulation. Regular cleaning protects your whole equipment system.

DE Filters

Diatomaceous earth filters catch the finest particles.

Grids cleaned and inspected
Routine backwashing plus periodic deep cleaning
Grids typically last 5 to 10 years

Sand Filters

Sand filters are simple and durable.

Backwashing and valve checks
Media typically replaced every 5 to 7 years
Inspection for channeling and wear

Cartridge Filters

Cartridges are removed and cleaned by hand.

Deep cleaning of pleated cartridges
Inspection for holes and tears
Typically replaced every 2 to 3 years

Our Filter Cleaning Process

Break down the filterWe fully take apart the filter and inspect every part.
Clean the grids and cartridgesFilter grids and cartridges are thoroughly cleaned to remove oils, minerals and fine particles.
Clean the tankThe filter tank is cleaned out.
Inspect for damageWe check for holes and tears that let debris pass through.
Lubricate the o-ringsFresh lubricant helps the seals last and prevents leaks.
Reassemble and checkWe put the filter back together and confirm it is running correctly.

Call (214) 402-8677 Request a Free Estimate

Signs Your Filter Needs Cleaning

Watch for these warning signs:

Reduced water flow from the returns
The pressure gauge reads 8 to 10 PSI above normal
Cloudy water
The filter runs longer than usual to clear the water
Your pool has more debris than usual, such as during pollen season

If flow is still weak after cleaning, the pump may be the problem. See our pool repair services.

Backwashing vs. Deep Cleaning

Backwashing reverses the water flow through a DE or sand filter to flush out debris. It is routine maintenance
Deep cleaning means opening the filter and cleaning or soaking the elements to remove built-up oils, minerals and fine particles

Gallery

How Often Should You Clean Your Pool Filter?

Every 4 to 6 weeks in swimming seasonA typical schedule for most pools.
Whenever the gauge reads 8 to 10 PSI above normalClean sooner if the pressure rises before the next scheduled cleaning.
More often when conditions are harshHeavy debris, pollen season or frequent pool use can require extra cleanings.

Included With Weekly Service

Filter pressure monitored at every visit
Filter cleaned when it needs it
A service report after each visit

Learn more about weekly pool maintenance.

Serving Allen and Nearby Cities

We clean and service pool filters for homeowners in Allen and the surrounding North Texas cities. Choose your city to see local details.

Related Pool Services

Weekly Pool MaintenanceSkimming, brushing, vacuuming and chemical balancing every week.Pool Acid WashRemoves stains and mineral buildup to restore your pool surface.Pool Repair ServicesPumps, filters, heaters, automation, lighting and plumbing repairs.Pool Algae TreatmentTreatment for green, black and mustard algae, plus prevention.Salt Cell Pool CleaningCleaning and inspection for saltwater chlorine generators.Pool Leak DetectionFinds the source of water loss in pools, plumbing and equipment.

Pool Filter Cleaning FAQ

How often should I clean my pool filter?

Pool filters should typically be cleaned every 4–6 weeks during swimming season, or when the pressure gauge reads 8–10 PSI above the normal operating level. Heavy debris, pollen season, or frequent pool use may require more frequent cleaning.

What types of filters do you service?

We clean and service all three major filter types: DE (diatomaceous earth), sand, and cartridge filters. Each type has specific cleaning procedures and media replacement schedules that our technicians follow.

How do I know when my filter needs cleaning?

Signs your filter needs cleaning include: reduced water flow, the pressure gauge reading 8–10 PSI above normal, cloudy water, or the filter running longer than usual to achieve clear water. Our weekly maintenance includes monitoring filter pressure and cleaning when needed.

What is the difference between backwashing and deep cleaning?

Backwashing reverses water flow through a DE or sand filter to flush out debris — it is a routine maintenance step. Deep cleaning involves opening the filter housing, removing the filter elements, and chemically cleaning or soaking them to remove built-up oils, minerals, and fine particles.

How much does a pool filter cleaning cost?

Filter cleaning is included as part of our weekly maintenance plans. For one-time cleanings, pricing depends on filter type and condition. Call us at (214) 402-8677 for a quote.

When should I replace my filter media?

Sand filter media should be replaced every 5–7 years. DE grids typically last 5–10 years. Cartridge filters should be replaced every 2–3 years, though they can be cleaned and reused in between. Our technicians will advise you when replacement is needed.

Can a dirty filter damage my pool equipment?

Yes. A clogged filter forces your pump to work harder, which can lead to premature pump motor failure, cracked filter housings, and reduced water circulation. Regular filter cleaning extends the life of your entire pool equipment system.

Do you offer emergency filter service?

Yes. If your filter fails or is causing equipment problems, we offer after-hours emergency service. Call (214) 402-8677 or email luke@hamiltonpoolstx.com with "Emergency" in the subject line.

Call (214) 402-8677 Request a Free Estimate

We Are Here For You

Our team of professionals are available from 8:30 am to 5:00 pm Monday – Friday to provide reliable and efficient services. If you have a pool emergency outside of office hours, you may email us at luke@hamiltonpoolstx.com and put “Emergency” in the subject line.